A fault code is the start of the diagnosis — not the answer.
Hawes & Son Ltd provides full mobile Bobcat diagnostic support. The process is built around confirming the complaint, testing the affected systems and proving the cause before recommending the repair.
Built around uptime — not workshop queues.
Modern machine faults often cross several systems. A warning on the display may lead to a wiring issue, failed sensor, CAN communication problem, pressure fault, actuator issue or mechanical cause. Good diagnosis means following the evidence rather than replacing parts until the fault changes.
Diagnostic work can include full fault-code scans, live data, sensor and actuator testing, electrical measurements, CAN checks, charging and starting diagnosis, DPF/emissions investigation and hydraulic fault finding where applicable.
Backed by 14 years working within a Bobcat dealership environment.
Diagnostics and repairs brought directly to the machine where practical.
Fault codes, test results, photos and verification recorded where applicable.
Essex, London and the South East
Mobile attendance across Essex, Kent, Bedfordshire, London and surrounding areas.
Practical Bobcat support in the field.
A fault code is the start of the diagnosis — not the answer.
- Full Bobcat fault-code scanning
- Live data and system monitoring
- Electrical and wiring testing
- CAN / communication diagnosis
- Sensor and actuator checks
- Starting and charging diagnosis
- DPF / emissions diagnostics and supported forced regeneration
- Hydraulic fault diagnosis
- Verification after repair
What to send us
- Machine make and model
- Serial number
- Machine hours
- Exact location
- Fault description or work required
- Photos / video where useful
- Any fault codes already shown
Why Hawes & Son
- Bobcat trained engineer
- 14 years Bobcat dealership experience
- Hands-on technical support background
- Full mobile diagnostic capability
- Field-based repairs and verification
- Direct, practical communication
ELECTRICAL FAULT. FOUND AT THE PLUG.
Grid Fit had an electrical issue on a Bobcat compact track loader. Rather than jumping straight to components, the circuit and connector were checked properly. The fault was traced to a plug where incorrect-size terminals had previously been fitted, leaving the connection wrong.
This is exactly the type of fault that can waste time and parts if the wiring and connectors are not tested first.
GRID FIT • BOBCAT ELECTRICALIncorrect terminals identified in the connector.
The electrical fault was traced to incorrect-size pins that had previously been fitted into a plug. The connection itself was the problem — not a reason to start changing expensive components.
ON-SITE • FAULT FINDINGOn-site diagnosis where the machine works.
Mobile support means the machine can be tested in its working environment, with wiring, connectors and machine systems checked methodically before a repair decision is made.
THREE MONTHS DOWN. FAULT FOUND.
Eden Energy contacted Hawes & Son Ltd after this Bobcat had been out of service for around three months with an electrical fault. The machine had already been attended several times without the issue being resolved.
Using specialist Bobcat knowledge and structured electrical fault-finding, the problem was traced, repaired and the machine returned to operation.
This is where specialist experience matters. With 14 years working within a Bobcat dealership environment, Bobcat training and full diagnostic capability, Hawes & Son is equipped to take on faults that are not always straightforward.
EDEN ENERGY • BOBCAT ELECTRICALMachine back up and running after around three months.
The fault had already resisted several previous repair attempts. A methodical electrical diagnosis found the cause and got the Bobcat back into service.
Electrical diagnostics • Wiring faults • CAN systems • Fault codes • Live data • On-site repair
Not every electrical fault is obvious.
Intermittent wiring, connector, communication and control-system faults can take time to prove. The diagnostic process is built around testing the system and identifying the actual cause before parts are condemned.
Need help with a difficult Bobcat fault?BOBCAT DOWN? CALL LIAM.
For urgent faults call direct. For bookings, parts and general enquiries, Kayleigh handles most initial enquiries.
Useful information before you book.
Can you carry out full Bobcat diagnostics on site?
Yes. Diagnostic work can include fault codes, live data, electrical testing, sensor and actuator checks, CAN investigation, emissions diagnosis and other system tests where supported.
Do you come to the machine?
Yes. Hawes & Son is a mobile engineering business and attends customer sites, yards and machine locations.
What should I send before booking?
Send the machine model, serial number, hours, exact location and a short description of the fault. Photos or video are useful where the issue is visible.
Do you supply parts?
Yes. Genuine Bobcat parts can be priced alongside suitable aftermarket alternatives where available. Parts are normally paid for before ordering unless agreed otherwise.
Related services & coverage.
Send us the machine details.
For a quote or booking, send the model, serial number, hours, location and what the machine is doing.